Some weld job with AR construction in szczecin Poland .
Weld using fluxcore.

Fabrication Trolley Table

Roll a plate strip and fab stands

Finished product  without wheels

Lovely Hangers

Weld using TIG, Polish finishing done by me   

Stainless Trays fabrication.

finished look

How I weld video

Remainder : did not sharpen my Tungsten , snap a little.

How I weld in thin material 1,2mm

Today welding job

Material Stainless SS

weld using pulse method

did not sharpen my Tungsten. Snap a little.

Fabrication stainless cabinet 1,2mm stainless (on going job for the week)

On the spot

Tacked

NO GAP NEEDED

Tig weld down hill no filler

tape for penetration

Other part of the cabinet .

Finished product 

Finished look

Material SS 12 ga 

welded using TIG with high amperage 200 A

with spot weld continuously no wire.   

Fabricated production trolley

     is 3 mm stainless has welded it with TIG using pulse method.. fit up welded by me

is fun using pulse method, very friendly with the workpiece based on my experience especially stainless it transfer less heat on the material and shown a nice color on it.

ampere is about 

200 and use manual switcher ON and OFF press it not full of a second and release.continues doing that all the way.