Tuesday, 21 November 2017

Rebuild stand for Generator/Genset using scrap





-re-position nut holes,
-added feet

Note : I Have to add a fuel tank stand too the problem is there is no space for that so i have to find more scrap and luckily i found it.is not perfectly have the same length as the main stand but it can work






Made a Fuel tank stand and battery bracket and weld them together onto main stand. for connecting the fuel tank stand with the main stand i used  cover plate 8mm thickness about 150mmx100mm length to joint it with the main stand and weld vertical up at the front side , and for the back side i made gap about 10mm make a lap joint  and weld all the way up same apply at the other side.






after some painting job...


No comments:

Post a Comment