Saturday, 14 April 2018

Fabricated production trolley














     is 3 mm stainless has welded it with TIG using pulse method.. fit up welded by me
is fun using pulse method, very friendly with the workpiece based on my experience especially stainless it transfer less heat on the material and shown a nice color on it.

ampere is about 
200 and use manual switcher ON and OFF press it not full of a second and release.continues doing that all the way.     














Sunday, 1 April 2018

Entering light fabrication (Stainless steel)










Before i go to Poland for working as a welder in light fabrication industry (Konstal Sp.o.o) i got this great opportunity to exercise my skill in it especially in thin material 3mm-1,4 mm stainless steel. i met great people and mentor in this local company that is i believe this company will be Big in sort coming years.

welded using pulse TIG in 14ga stainless steel.
Full amperage and running without wire.

a note for remainder :

stainless is hate heat so running "below radar" or control your heat to keep your workpiece still in form.





















 

Thursday, 21 December 2017

Cover fuel Tank





                             
               Got this job this morning ,still learn for better looking weld 2nd pass.






      
        3rd pass/capping done..

Saturday, 9 December 2017

Muffler for Generator GS #302



not consistence beat still learn for better.






Weld Using :
Oxyacetylene  tip #10 (RB electrode)
SMAW/Stick 7016 3.2mm electrode by Kobe




















capping done..

Tuesday, 28 November 2017

Body repair Pontoon EX PC200


Side Body

hydraulic Hose covers

Repairing processes :

Cut the eye pad and cut the broken cover U beam

straighten the uneven side body with heat and hammer and replace the side cover with new U beam



Fabricated eye pad


Beveled and weld all around   


fabricated hydraulic hose covers








All repair process has done using :

Manual cutting oxyacetylene
Grinder
SMAW/stick welding low hydrogen 3.2 mm electrode by kobe 7016
and other tools like ruler , stone pencil , hammer.


 

 







Tuesday, 21 November 2017

Rebuild stand for Generator/Genset using scrap





-re-position nut holes,
-added feet

Note : I Have to add a fuel tank stand too the problem is there is no space for that so i have to find more scrap and luckily i found it.is not perfectly have the same length as the main stand but it can work






Made a Fuel tank stand and battery bracket and weld them together onto main stand. for connecting the fuel tank stand with the main stand i used  cover plate 8mm thickness about 150mmx100mm length to joint it with the main stand and weld vertical up at the front side , and for the back side i made gap about 10mm make a lap joint  and weld all the way up same apply at the other side.






after some painting job...